Deep
induction hardened and excellent hardened depth pattern on entire tooth
profile provide long wear life. Either from cast steel or from hot
forging, Berco sprockets guarantee maximum resistance and durability even
in the most severe applications. Accurate machining of hubs and flanges
provide perfect interchangeability.
Sprockets, sprocket rims and bolt-on type.
More
than 600 different configurations to match any chain or application.
For
track-type machines ranging from 1 to 300 ton.
Cast
steel or not forged steel for optimum internal grain flow.
Single
Shot Induction hardening for high surface hardness (HRC>50).
Effective hardened depth 4 ÷
10
mm for HRC 45.
Specific low alloyed boron steel (low alloyed steel for cast version)
for high hardenability.
Tempered to resist cracking and chipping.
Optimized design to reduce stress concentration areas.
Hunting
tooth deign extends wear life.
Accurate machining of the mounting surfaces ensure best performance.
IDLER GROUPS
Berco
track Idler Groups are manufactured for superior for superior wear
resistance. Whether cast, forged or fabricated, Berco idlers provide
superior structural support and resurfacing capabilities. Special heat
treatment ensures proper hardness level, providing long wear resistance.
Berco’s seals groups ensure lifetime lubrication lubrication eliminating
idler maintenance and reducing operating cost. Berco offers the widest
variety of idler groups to meet the requirements of your work environment.
Cast,
forged and fabricated (double or single flange) types.
Ultra
low temperature (-50°C) version available.
More
than 500 different configurations.
For
track-type machines ranging from 1 to 300 ton.
Low
alloyed boron steels with certified hardenability based on Berco
specification (for fabricated versions).
Low
alloyed cast steel (cast version).
Heavy
duty ring-rolled tread rims (for fabricated version).
Induction hardened tread diameter.
High
tread surface hardness (HRC>50) for reduced wear and longer life.
Tempered to resist cracking and chipping.
Precise
design and manufacturing for proper fit.
Easy
resufacing.
Idlers
can be supplied alone or fully assembled with brackets, adjuster and
tension device.
SEGMENTS
Are
through hardened for improved wear resistance. High surface, depth and
core hardness mean Berco segments provide long wear life, resistant to
bending, breakage and maximum hardware retention. The bolt-on design
reduces your machine downtime.
3, 4, 5
and 6 teeth.
More
than 80 different segment groups, to match any chain or application.
For
track-type machines ranging from 8 to 110 ton.
Hot
forged for optimum internal grain flow.
Through
hardened for high surface hardness (HRC>50) and tough core (HRC 45).
low
alloyed boron steel for high hardenability.
Precise
design and accurate machining of the of the mounting surfaces ensure
best performance.
